Sep 10, 2016 #1 kurtz Mechanical Joined Sep 10, 2016 Messages 34 Location PL Can you recommend a a simple software to isometric drawings? If the project is large we use PDMS, but if we have to do 5-10 pipelines it does not pay.
Can you recommend a a simple software to isometric drawings? If the project is large we use PDMS, but if we have to do 5-10 pipelines it does not pay.
Sep 10, 2016 #2 pennpiper Mechanical Joined Dec 9, 2005 Messages 1,687 Location US Do you know how to draw manual isometrics? Sometimes its possible to do all the right things and still get bad results Upvote 0 Downvote
Do you know how to draw manual isometrics? Sometimes its possible to do all the right things and still get bad results
Sep 10, 2016 Thread starter #3 kurtz Mechanical Joined Sep 10, 2016 Messages 34 Location PL I do it all the time, but it takes too long Upvote 0 Downvote
Sep 12, 2016 #4 LittleInch Petroleum Joined Mar 27, 2013 Messages 22,961 Location GB Try some of these? http://softadvice.informer.com/Piping_Isometric_Drawing_Software.html Acorn pipe looks the most interesting to me, but nothing that is good is free... Remember - More details = better answers Also: If you get a response it's polite to respond to it. Upvote 0 Downvote
Try some of these? http://softadvice.informer.com/Piping_Isometric_Drawing_Software.html Acorn pipe looks the most interesting to me, but nothing that is good is free... Remember - More details = better answers Also: If you get a response it's polite to respond to it.
Sep 12, 2016 #5 Gator Industrial Joined Jun 21, 1999 Messages 438 Location CA I think AcornPipe is priced on a per iso basis, it was last time I checked. It's mainly used for shop spool drawings but can do isos as well. Upvote 0 Downvote
I think AcornPipe is priced on a per iso basis, it was last time I checked. It's mainly used for shop spool drawings but can do isos as well.
Sep 13, 2016 #6 europipe Chemical Joined May 14, 2007 Messages 710 Location NL Is five hours for an average handdrawn iso too long?? Upvote 0 Downvote
Sep 13, 2016 Thread starter #7 kurtz Mechanical Joined Sep 10, 2016 Messages 34 Location PL if you have about 45 items (flanges, bolts ect...) it takes more than 5 hours Upvote 0 Downvote
Sep 14, 2016 #8 europipe Chemical Joined May 14, 2007 Messages 710 Location NL I think there is not a less timeconsuming way. Maybe 3d autocad with the piping program? Upvote 0 Downvote