Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Siemens Tisoft

Status
Not open for further replies.

wbd

Electrical
May 17, 2001
659
Hi,
I'm looking for the DOS version of Siemens Tisoft PLC program. Can I get this from someone? (Siemens does'nt support this anymore)
 
Replies continue below

Recommended for you

from Siemens web page:

TISOFT2™ Programming

For our die-hard MSDOS® users TISOFT2 Release 7.1 is available.

Offered in two versions
Full Package - PC505-6271
Upgrade Package - PC505-UPG71
Both include COM PROFIBUS Rel 3.3
TISOFT® Limitations
Does not support SmarTune™ and extended Loop and Alarm functions in 555 CPUs
Not recommended for use under Windows® 95/98/NT/2000 - expect communication time-outs especially with Windows® -NT®
Some PCs, especially laptops, no longer support serial communications from an application running under Windows® in an MSDOS session
 
Does anyone remember the single user liscense cost for the DOS based TISoft programming package (500 sereis chips like 505, 530c, etc)? Thanks in advance. :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor