12bucklemyshoe
Chemical
How do I communicate with this thing with my hart 475 communicator? Please help!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Siemens ps2?
- Thread starter 12bucklemyshoe
- Start date
- Status
Like you do with any transmitter, assuming it is HART, but do not power the PS2 with a 24Vdc power supply, power it with 4-20mA loop simulator.
Install the PS2 HART DD in the handheld.
If Rosemount doesn't have it, the PS2 positioner's DD file for the 375 is here:
Note that the outlined download is for the 375.
Power the positioner with a 4-20mA loop power simulator, NOT a 24Vdc power supply.
The PS2 has more than 250 ohms inptu resistance so the handheld will read it by attaching the leads on the PS2's analog input.
Install the PS2 HART DD in the handheld.
If Rosemount doesn't have it, the PS2 positioner's DD file for the 375 is here:
Note that the outlined download is for the 375.
Power the positioner with a 4-20mA loop power simulator, NOT a 24Vdc power supply.
The PS2 has more than 250 ohms inptu resistance so the handheld will read it by attaching the leads on the PS2's analog input.
- Thread starter
- #3
12bucklemyshoe
Chemical
How do I get the ps2 hart DD from online to on my hand held?
- Status