P
prashantshelke
Guest
View attachment 1304
Geometric to unveil latest version 4.0 of DFMPro on NXTM at Siemens PLM Connection Americas 2015!
Global competition, increasing product complexities and high cost of rework has led to rapid emergence of Product and Manufacturing information (PMI) environment where 3D CAD model serve as the authority data source for downstream manufacturing applications, replacing 2D drawings and facilitating better communication.
DFMPro is a powerful CAD integrated Design for Manufacturing & Assembly solution, which facilitates upstream manufacturability validation and identification of areas of a design that are difficult, expensive or impossible to manufacture.
DFMPro also provides global best practices for implementing PMI and empowers designers to quickly validate their 3D models to ensure that they comply with industry standards and PMI best practices.
With the new version of DFMPro, NX users can have much greater flexibility to design products for multiple processes, including additive manufacturing, tubing and sand casting and significantly reduce engineering change orders (ECOs) by getting their designs right the first time.
Join Geometric at the KT session at SPLM where we unveil the power of latest version of DFMPro for NX
“Validating 3D Product and Manufacturing Information (PMI) through DFMPro”
May 20, 2015. 14:00 PM to 14:10 PM
Save the date!
Geometric to unveil latest version 4.0 of DFMPro on NXTM at Siemens PLM Connection Americas 2015!
Global competition, increasing product complexities and high cost of rework has led to rapid emergence of Product and Manufacturing information (PMI) environment where 3D CAD model serve as the authority data source for downstream manufacturing applications, replacing 2D drawings and facilitating better communication.
DFMPro is a powerful CAD integrated Design for Manufacturing & Assembly solution, which facilitates upstream manufacturability validation and identification of areas of a design that are difficult, expensive or impossible to manufacture.
DFMPro also provides global best practices for implementing PMI and empowers designers to quickly validate their 3D models to ensure that they comply with industry standards and PMI best practices.
With the new version of DFMPro, NX users can have much greater flexibility to design products for multiple processes, including additive manufacturing, tubing and sand casting and significantly reduce engineering change orders (ECOs) by getting their designs right the first time.
Join Geometric at the KT session at SPLM where we unveil the power of latest version of DFMPro for NX
“Validating 3D Product and Manufacturing Information (PMI) through DFMPro”
May 20, 2015. 14:00 PM to 14:10 PM
Save the date!
