Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shutin Pressure Test, Build Up response

Status
Not open for further replies.

moredrilling

Petroleum
Joined
Feb 20, 2017
Messages
5
Location
US
Hello Sirs,
We recently had to shut in few wells and in the process were able to record pressure data for build-up analysis. The PIP was used to generate the following build-up log-log interpretation. Few of the wells were showing a long period of a shallow <1/2 slope on the derivative plot. It could be justified as partial penetration which is reasonable with the perf distribution we have in the well, but it looks suspicious. Is there anything else worth considering? The esp sensor is near the top of the first perforation. Image to the interpretation is below.
Ur9ks

Thank You
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top