Pud
Mechanical
- Mar 26, 2003
- 2,707
Hi all,
We are currently having a tool made for a product with a tolerance of +0/-0.5 over 197mm. Wall thickness 5mm.
Du Pont only have the shrinkage data for 2mm thickness (Doh!).
Some material manufacturer's have info on shrinkage vs wall thickness, but as usual,I cannot find amongst my data heap.
I anyone has info would be appreciated.
Material is Zytel 73G30T (PA6)
Cheers
Harry
We are currently having a tool made for a product with a tolerance of +0/-0.5 over 197mm. Wall thickness 5mm.
Du Pont only have the shrinkage data for 2mm thickness (Doh!).
Some material manufacturer's have info on shrinkage vs wall thickness, but as usual,I cannot find amongst my data heap.
I anyone has info would be appreciated.
Material is Zytel 73G30T (PA6)
Cheers
Harry