Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shotcrete Wall

Status
Not open for further replies.

msquared48

Structural
Aug 7, 2007
14,745
Anyone have any good structural notes for a shotcrete wall they can share?

Mike McCann
MMC Engineering
 
Replies continue below

Recommended for you

Design with F'c of 2500 psi even if 3000 psi is measured by the lab. Woven wire fabric of tight spacing combined with rebar and backing forms give good results. Note that rebound causes volume losses up to 40%. Use 2" minimum cover unless interior application.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor