Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shore A from stress-strain data

Status
Not open for further replies.
irq

irq

Aerospace
Joined
Jan 18, 2008
Messages
45
Location
AT
I have the stress strain data of the rubber tested in compression. Do anybody know how I can obtain from these data Shore A of the material? Thanks!
 
Sort by date Sort by votes
I have never hear that there is a correlation between stress/strain data and hardness.
tom
 
Upvote 0 Downvote
As far as I know there is no correlation between hardness and stress/strain data.
 
Upvote 0 Downvote
Gent, Engineering with Rubber, indicates an empirical relationship between Shore hardness and initial Young's modulus.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Garrett Green
  • Locked
  • Question Question
Shore A Hardness for sealing
Replies
9
Views
797
Tmoose
Tmoose
N
  • Locked
  • Question Question
How to bond or increase adhesion of a extruded silicone hose(braided hose, heater hose etc)?
Replies
0
Views
692
nikhilmathew
N
edison vontex
  • Locked
  • Question Question
Is there currently a method to completely solve the blooming problem in rubber products or at least
Replies
0
Views
731
edison vontex
edison vontex
TallOne1113
  • Locked
  • Question Question
ASTM D2000 LINE CALL OUT
Replies
0
Views
1K
TallOne1113
TallOne1113
bagotnj
  • Locked
  • Question Question
Banbury Mixing & Milling Improvements
Replies
0
Views
625
bagotnj
bagotnj

Part and Inventory Search

Sponsor

Back
Top