Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shock Response Spectrum using ANSYS Workbench

Status
Not open for further replies.
Tunalover

Tunalover

Mechanical
Joined
Mar 28, 2002
Messages
1,179
Location
US
Can anyone say if it's possible to analyze an object in ANSYS WB when the object is exposed to a Shock Response Spectrum? If not, is there a way to do it with command snippets from ANSYS Classic?

Bruce aka Tunalover
 
Sort by date Sort by votes
Dear

You can do this with the response spectrum analyse in Workbench.

Regards
 
Upvote 0 Downvote
ANSYSFREAK-
Thanks for the reply.
In which revision of ANSYS WB is this available? I have Rev. 11.



Bruce aka Tunalover
 
Upvote 0 Downvote
ansysfreak-
I have Workbench Rev. 11 and that version does not have response spectra capability. Is there a way to use command snippets from ANSYS Classic?

Bruce aka Tunalover
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
426
struclearner
struclearner
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
R
  • Locked
Guidance on Settlement Analysis of Steam Generator in Oil Plant Using ANSYS
Replies
0
Views
813
Rabea-19
R

Part and Inventory Search

Sponsor

Back
Top