If anybody with this x-ray portable has had a similar experience, I would appreciate some guidance. The drive is pulling to the right. I performed the handle calibration per book but the readback numbers don't change for the right forward position, which is also the direction it is pulling to .
Are these optical or IR sensors which detect the handle deflection? The book calls them FSR, whatever that means. They look like photo detectors, but can't figure out how it works. Thanks for any input.
Are these optical or IR sensors which detect the handle deflection? The book calls them FSR, whatever that means. They look like photo detectors, but can't figure out how it works. Thanks for any input.