Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Shell rolling
- Thread starter asv80
- Start date
Depending on the intended use, you might find suitable something in the list of manufacturers at this site:
- Thread starter
- #3
asv80,
One source that can make rolls (consisting of single or multiple wall/shells) is Morrison-Berkshire, in North Adams, MA. They roll their own components, and can turn a 6' X 60' roll.
They can roll 1/2 or even thicker material, up to 20' long.
BK
One source that can make rolls (consisting of single or multiple wall/shells) is Morrison-Berkshire, in North Adams, MA. They roll their own components, and can turn a 6' X 60' roll.
They can roll 1/2 or even thicker material, up to 20' long.
BK
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question