I am looking for cam software to program Amada turret punch presses, and have arrived at a short list of Metalsoft & Striker. Any opinions/thoughts about which is the better product? I favor Striker because of the arrogant attitude of the Metalsoft sales people, but would appreciate any feedback.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sheetmetal CAM
- Thread starter meterbox
- Start date
I have been using Fabriwin for many years, sorry to hear that you have had problems with sales personal. I have dealt only with people at Amada not with people at MetalSoft .
I have also heard that MetaCam has a good product silimar to
what Amada offered prior to mergering with MetalSoft.
I have also heard that MetaCam has a good product silimar to
what Amada offered prior to mergering with MetalSoft.
Try looking at WiCAM's PN4000 CAD/CAM Software. They are suppose to open a new US office.
Check them out at
They are by far the most advanced
Check them out at
They are by far the most advanced
franklineng
Industrial
You could also take a look at
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question