Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sheet Metal views

Status
Not open for further replies.
gatz

gatz

Mechanical
Joined
Aug 4, 2003
Messages
68
Location
US
Is it possible to show a sheet-metal part in both its "Sheet-Metal" AND its "Flatten-Bends" states at the same time?

(not sure of the correct terminologies here...)

Multiple windows or split windows or ??
Active/inactive windows?

 
Sort by date Sort by votes
OK, thanks
 
Upvote 0 Downvote
You could create an assembly with both the folded and unfolded instance if you wanted to see a 3d comparison.

-b
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Question Question
Modifying Sheet metal parts
Replies
3
Views
9K
SBaugh
SBaugh
Andrejs Menkins
  • Locked
  • Question Question
Macro for DXF export (sheet metal) from part files with revision suffix
Replies
2
Views
1K
Andrejs Menkins
Andrejs Menkins
CAD2015
  • Locked
  • Question Question
How to (simultaneously) move multiple non linked views in SolidWorks.....
Replies
2
Views
512
CAD2015
CAD2015
Jboggs
  • Locked
  • Question Question
Relative body views of sheet metal weldments
Replies
3
Views
356
Jboggs
Jboggs
drcole
  • Locked
  • Question Question
sending a flat pattern to a sheet metal shop
Replies
7
Views
914
ctopher
ctopher

Part and Inventory Search

Sponsor

Back
Top