Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

sheet metal, bend, FEA

Status
Not open for further replies.
FrancoisB

FrancoisB

Mechanical
Joined
Apr 28, 2005
Messages
10
Location
CA
Hi every body I have a simple problem but I'm not sure of my method is quick. I have a bend sheet metal and the bend of my conception is for rigidify the structure. And in the radius bend the metal change is proprieties. Me this is important beceause I have need deflection maximum. Me for the moment I take the sheet metal witout bend and bend it with FEA and reuse result for the next with some force. Do you know a better way.

Ansys user

Francois Brouillard P.Eng

:-)
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
M
  • Question Question
FEA Frame Analysis (bolted and welded connections) of a skid.
Replies
0
Views
1K
mariyan.vt
M
G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
EdwardNigma
  • Question Question
What boundary condition techniques do you use to keep FEA models realistic?
Replies
11
Views
24K
GregLocock
GregLocock
EdwardNigma
  • Locked
  • Question Question
Mastering FEA: How to Get Through Stage 2 (Developing Good Modeling Techniques)?
Replies
7
Views
4K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top