shaded view in drawing

[GrLoki]

Hello,

im using NX 9.0.2.5., there i shut to make view of body with selected zones which are not dependent on isometrical lines. Usually, in other CAD-software, they are sketched on general body sheets and colored by kind. It have to be in flat shading (on each place shut be same color) without flashes.
I maked it in NX by same way, in 3D i set up light on ambient, here i reached right view with flat shading. Unfortunatly im was surprised, that light setting was not taked over to drawing view, f.e. see attachment.
After few effort i dont know how to manage light in drawing view. Is here some posibility reach same ambiente light in 3D and in drawing view as well?

 

[GrLoki]

Here is more exact example. Bottom is to seeing, that on planar face it has other color as on general face. Any way both shut be in one kind group. Such drawing will not accepted.

I tried also hatching by each zone. But it wasted more times and bring only double work without connection between 3D and drawing.