Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
shaded view in drafting
- Thread starter Candas
- Start date
This is the comment from John Baker of UGS on the same question from UG BBSnotes: "That is not supported (officially or UN-officially) at the moment."
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
"Wildfires are dangerous, hard to control, and economically catastrophic."
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand
In NX2 you can place a tif or jpg image in a drawing, but the UG plotter functionality cannot print/plot it. Anything older than NX2, no, you cannot...
-Derek
DL Engineering Services
specializing in CAD Design Consultation Services
-Derek
DL Engineering Services
specializing in CAD Design Consultation Services
- Status
