I simply would like to make all of my dimensions have trailing zeroes on ST. I can go to each individual dimension property and change this but this gets quite tedious. I would like to set this for all of my drawings once and not change it again but not sure how. Any suggestions would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Setting drafting options to all sizes on ST
- Thread starter jheal2
- Start date
In your template file, go to format, style, and change the settings you want in whatever style you use.
This will be propagated to new drawings.
You can do similar in existing drawings though it will only effect those drawings.
This will be propagated to new drawings.
You can do similar in existing drawings though it will only effect those drawings.
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
- Status
Similar threads
- Locked
- Question
- Locked
- Question