Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Seminar on Sheet Piling Design 4
- Thread starter bridge09
- Start date
rowingengineer
Structural
please keep you posts to one forum
Arguing with an engineer is like wrestling with a pig in mud. After a while you realize that them like it
Arguing with an engineer is like wrestling with a pig in mud. After a while you realize that them like it
- Thread starter
- #3
posting policies are here:
The following activities can result in deletion of posts, deletion of threads and/or restriction of further site usage. Members who engage in any of the following activities may be red flagged by the membership. Management of this site does not read any post unless it has been red flagged by a member. In no particular order, here are some common offenses:
Selling
Recruiting
Student Posting
Profanity
Cross Posting
Tack-On Posting. If you have a new question, start a new thread.
Arguing in an Unprofessional Manner
Posting of Personal Information
Posting Anything Illegal (including hacking, cracking, passwords, etc.)
Defamatory Posting
Shill Posting, or posting made at the behest of a company
Leeching (members posting only questions, and never helping others)
Irritating Other Members
On the other hand, members are expected to:
Search Google, Previous Posts, and FAQs Prior to Posting.
Write Intelligent Questions And Use Descriptive Subject Lines
Thank Other Members For Help Received & Click the "Thank (member) For This Valuable Post!" Link
Help Other Members
Red Flag Offensive Posts
Be Professional
The following activities can result in deletion of posts, deletion of threads and/or restriction of further site usage. Members who engage in any of the following activities may be red flagged by the membership. Management of this site does not read any post unless it has been red flagged by a member. In no particular order, here are some common offenses:
Selling
Recruiting
Student Posting
Profanity
Cross Posting
Tack-On Posting. If you have a new question, start a new thread.
Arguing in an Unprofessional Manner
Posting of Personal Information
Posting Anything Illegal (including hacking, cracking, passwords, etc.)
Defamatory Posting
Shill Posting, or posting made at the behest of a company
Leeching (members posting only questions, and never helping others)
Irritating Other Members
On the other hand, members are expected to:
Search Google, Previous Posts, and FAQs Prior to Posting.
Write Intelligent Questions And Use Descriptive Subject Lines
Thank Other Members For Help Received & Click the "Thank (member) For This Valuable Post!" Link
Help Other Members
Red Flag Offensive Posts
Be Professional
-
2
- #5
-
1
- #6
You may also want to check DFI ( or FHWA National Highway Institute (nhi.fhwa.gov) for upcoming courses or conferences.
Jeff
Jeff
-
1
- #7
Try the North American Steel Sheet Pile Association. They just had a sheet piling symposium in Kansas City, MO at the DFI 34th annual conference.
Also try this from L.B. Foster and hartman Engineering.
I am not sure LB Foster and Hartman are doing those anymore since Gerdau Ameristeel has become involved with the sheet piling division.
Another resource to consider is Skyline Steel
Another resource to consider is Skyline Steel
- Status
Similar threads
- Locked
- Question
- Locked
- Question