Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Self Drill w/Dull Head Finish

Status
Not open for further replies.
QAguy

QAguy

Industrial
Joined
Feb 2, 2004
Messages
2
Location
US
I'm looking for 12-24x3/4" Flat head #3 Phillips drive, stainless steel, self drilling screws with a flat finish on the head to match clear anodized aluminum. Any suggestions?
 
Status
Not open for further replies.

Similar threads

durablack2
  • Question Question
What process / method to make this aluminum edge?
Replies
1
Views
4K
Brian Malone
Brian Malone
SAEEDGH
  • Question Question
nesting & Warehousing software for sheet metals
Replies
0
Views
7K
SAEEDGH
SAEEDGH
KegOBear
  • Locked
  • Question Question
Teather Cable without drilling
Replies
4
Views
394
EdStainless
EdStainless
I
  • Question Question
OEE at 75% for dairy processing with 6 data analysts.
Replies
0
Views
6K
Industrial AI guy
I
gkvengat
  • Locked
  • Question Question
ASTM B705 EFW Pipes Welded with Filler Metal Addition
Replies
2
Views
3K
mfgenggear
mfgenggear

Part and Inventory Search

Sponsor

Back
Top