Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Self Drill w/Dull Head Finish

Status
Not open for further replies.
QAguy

QAguy

Industrial
Feb 2, 2004
2
I'm looking for 12-24x3/4" Flat head #3 Phillips drive, stainless steel, self drilling screws with a flat finish on the head to match clear anodized aluminum. Any suggestions?
 
Status
Not open for further replies.

Similar threads

KegOBear
  • Locked
  • Question
Teather Cable without drilling 2
Replies
4
Views
301
EdStainless
EdStainless
gkvengat
  • Locked
  • Question
ASTM B705 EFW Pipes Welded with Filler Metal Addition
Replies
2
Views
3K
mfgenggear
mfgenggear
E
  • Locked
  • Question
Aluminium Extrusion Surface Problems (wire,hair,fiber, whatever you say... and burrs)
Replies
3
Views
4K
mfgenggear
mfgenggear
O
Chemical Mechanical Planarization (CMP) in Wafer Fabrication Semiconductor
Replies
0
Views
2K
oday25
O
B
  • Question
A question about Waspaloy material
Replies
2
Views
885
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom