Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Selection of SPWD or RTJ Gasket

Status
Not open for further replies.
HardikPandya

HardikPandya

Mechanical
Joined
Apr 13, 2015
Messages
3
Location
CA
Can any 1 suggest me which gasket is suitable??
Design pressure: 97 kg/cm2(g)
Design Temperature: 150 c
Service Fluid: Hydrogen + Hydrocarbon + H2S
m.o.c: C.S (SA 266 GR 2)

Vendor proposed SPWD since it would be more cheaper.
 
Sort by date Sort by votes
Define "suitable"

How much hydrogen?

Spiral wound would be normal choice

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Pavan Kumar
  • Locked
  • Question Question
Pressure Rating of PN25 Spiral Wound Gasket Built to EN 1514-2
Replies
2
Views
3K
Pavan Kumar
Pavan Kumar
J
  • Locked
  • Question Question
High Temperature Gasket Torque
Replies
8
Views
8K
TugboatEng
TugboatEng
W
  • Locked
  • Question Question
Leaking gasket joint
Replies
4
Views
1K
LittleInch
LittleInch
C
  • Question Question
ID Overlap between the gasket and the raised face flange
Replies
4
Views
609
cheezypuff
C
Ahmed Habashy
  • Locked
  • Question Question
Steam coil material selection
Replies
2
Views
2K
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top