Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Selection of Internal Floating Roof for Crude Oil Service

Status
Not open for further replies.

MOHAMMED89

Mechanical
Joined
Feb 25, 2015
Messages
85
Location
AE

Good Morning all,

please put forward me some ideas regarding the selection of Internal Floating Roof (IFR)for below points:

1.
For Crude oil service, which type of IFR is more suitable?

2.
Aluminium or Carbon Steel, which material is more suitable for IFR for crude service?

Tanks in Advance.
 
Good morning Mohammed,

1. I built single deck for Crude Oil. I built also double deck for crude oil. All roof on these tanks are EFRT. Last one I built Dome Roof with internal framing for Crude Oil Tanks.

2. I built dome roof with Alumunium IFRT. The vacono deck was design by Rheifelden (Germany). I did also CS IFRT on DRT.

It is depend on client requirement and tank designer judgment.



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top