Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

seismic transient analysis using ansys

Status
Not open for further replies.
ASDNET36

ASDNET36

Structural
Joined
Dec 26, 2013
Messages
5
Location
SA
hi,

i study the seismic behavior of liquid storage tanks, i try to apply the vertical and horizontal component of the earthquake record at the base of the tank but i don't know how to do that using ANSYS.


if anyone know how to apply this seismic loads, please tell me



regards
 
Status
Not open for further replies.

Similar threads

Kamyar_K
  • Question Question
How to get uniform tension in a rail using dynamic/explicit analysis?
Replies
6
Views
9K
rb1957
rb1957
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
mohamed hassan 2014
  • Locked
  • Question Question
Nonlinear analysis using HyperMesh with OptiStruct
Replies
0
Views
643
mohamed hassan 2014
mohamed hassan 2014
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV

Part and Inventory Search

Sponsor

Back
Top