Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seismic and Nozzle Evaluation

Status
Not open for further replies.

Marco Polo

Mechanical
Joined
Jan 28, 2019
Messages
6
Location
SA
Dear All,

I just want to know, Do I need to subject the vessel connected to the pipe for seismic analysis OR just the pipe only?

Also, Do I have to evaluate the nozzle loads of vessel with seismic loadcase?

Please I need your opinion and expertise.

Thank you.

Regards,
Marco
 
I would say yes. Why would you not check EQ loads on the vessel?
 

The purpose of any analysis is to check if everything is OK. Without testing a part interconnected to another part you have not checked the total system.

(You do not leave out any part when you check a car for road safety.)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top