Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seismic analysis - general basis

Status
Not open for further replies.
Pawel27

Pawel27

Structural
Nov 18, 2008
78
I would like to ask for general review of different approach
to seismic subject with using FEM programs (acc to Eurocode). I mean step by step procedure for different approach (static and dynamic analysis).
 
Status
Not open for further replies.

Similar threads

PKJENNY
  • Question
Seismic Structural Design
Replies
1
Views
2K
KootK
KootK
nategemb
  • Question
Seismic Loads for Cranes
Replies
3
Views
2K
HTURKAK
HTURKAK
Serhiy2
  • Question
Light Pole Seismic Design - Canada
Replies
0
Views
2K
Serhiy2
Serhiy2
M
  • Question
Question about seismic design according to CSA S6:19 (Canadian bridge standard)
Replies
0
Views
3K
Max12345
M
A
  • Question
Earthquake engineering to Eurocode 8 - No seismic member aside from wall
Replies
1
Views
2K
HTURKAK
HTURKAK

Part and Inventory Search

Sponsor

Back
Top Bottom