Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seeking micro air motor 1/8 to 1/3hp 3500 rpm 1

Status
Not open for further replies.

higgo88

Specifier/Regulator
Joined
Apr 6, 2005
Messages
1
Location
AU
I am seeking a very small air motor or someone to design same for a new product I am working on.
1/6 to 1/3 hp output (0.125 to 0.25 Kw) 3250 rpm approx.
Dimensions
diameter approx. 1.1 inches 28mm
length approx. 2.0 inches 51mm

Even if someone can point me in the right direction it will be a big help.
 
Hi Higgo88,
For starters try Parker Hannifin Corporation - Actuator Division. Their catalog shows a 0.47 ft.lb.torque, 3600 RPM, 1.06 OD x 5 long unit. I think these are vane type motors with a concentric or coaxial planetary gear reduction unit. The output shaft dia. is 0.312. I have not found any in your torque speed range with overall length less than 5. Another source may be ARO Ingersoll Rand.
 
Cooper Tools is another supplier of vane motors.

McMaster Carr has several in the size range you are looking for in thier catalog.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top