Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Section Views

Status
Not open for further replies.

laelow

Military
Joined
Dec 2, 2004
Messages
17
Location
US
[cheers]
I have a drawing that is going to have eight to twelve pages when I get through the assembly drawing. I want have a section call-out on page one and have section view show on page three and four, and etc. When I press the section view button, I draw the line and etc. but it attaches it to first page, I already have enough stuff on the first page I would like to place the section view that I made on a different sheet, is this at all possible ?
 
laelow,

All you have to do is drop the section view on the current page. Once you have created the section view go to Edit,Cut and select the page you want your section view and Edit, Paste. That's all there is to it.

Scorch
 
Thank-you Scorch, worked very well.

laelow
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top