Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Section E.6.1.4, API 650

Status
Not open for further replies.

sme75

Structural
Joined
Feb 6, 2003
Messages
40
Location
US
I noticed that the coefficients on the equations for Ni and Nc have changed between Addendum 4 of the 10th edition and the 11th edition. Does anyone know the reason for the change and what effects the changes have on the calculated loads?

Also, in equation E.6.1.4-4B two new variables are included in the equation. They are Cc and S. I can not find where these are defined. Are they in there and I am just overlooking them?
 
Sounds like an inquiry to API would be in order on this one.
 
If the values are correct it will increase the combination stress from seismic and liquid. I asked API this question along with several others on the seismic and was told that there are corrections to these coming in the Addendum 1 to be released in January.
 
January of which year? API is notorious for missings schedules bigtime. My guess is January 2009!!!

Joe Tank
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top