Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Section data: principal axes of inertia

Status
Not open for further replies.
bcmemento

bcmemento

Mechanical
Joined
Sep 19, 2011
Messages
6
Location
CZ
I made beam sections from areas in ansys classic. I'm able to get section data: Area, Iyy, Iyz, ...
Any suggestions on how to get principal axes of inertia?
 
Sort by date Sort by votes
I figured it out. Got it from Ixx, Iyy, Iyz by Mohr circle.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Faraz1997
  • Locked
  • Question Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
1K
NRP99
NRP99
O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
andradesilva
  • Locked
  • Question Question
how to print on the screen or export the axial inertia moment of a model, in ANSYS Mechanical APDL
Replies
1
Views
590
gnc89
gnc89
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T

Part and Inventory Search

Sponsor

Back
Top