Searching for injection mouldable ceramic feedstock

[ZTA]

We are searching for injection mouldable feedstock of Alumina, Zirkonia, ZTA etc.
Or else binders suitable to produce injection mouldable feedstock.

 

[TVP]

Two suppliers of ceramic injection molding feedstock are the following:

http://www.inmatec-gmbh.com/index.htm?pul_e.htm

http://www.ee-tec.com/introduction.htm

 

[Ceramicguy]

Honeywell, the old Allied Signal company in Morristown New Jersey USA used to sell an aqueous binder system suitable for ceramics and metals used in injection molding-primarily low pressure, high solids molding. I think their website is

http://www.honeywell.com

At one point they were licensing the metal injection molding technology. I don't know the current status of the binder system.

 

[cp2616]

The Allied Signal technology is licienced to Latitude Manufacturing.

http://www.latitudemanufacturing.com/.

I don't think they are doing a Ceramic at this point. BASF makes a catalytic debind feedstock for Alumina and Zirconia. For details check out

http://www.basf.de/en/produkte/chemikalien/catamold/erfolgsrezept/?id=V00--y2niCv**bsf500