Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Searching for a motion controller device to use...

Status
Not open for further replies.

heepofajeep

Mechanical
Joined
Jul 5, 2006
Messages
2
Location
US
Currently I am using a pc to drive a stepper motor through a xylotex-brand motor controller. The problem is the PC's time clock just doesn't allow for steady movement.

What I need is a specific controller to handle the signal to the motor. All I want the PC to do is send a command to the controller saying "go here". I just do not have any experience with this, however, so your expertise would be greatly appreciated. I just need to know what device to use to enable smooth movement of the motor. Also, I would really like the controller to take in feedback from a linear encoder.

FWIW, the xylotex controller uses simple ttl logic, with a 1.5v max LOW signal & 2.9volt min HIGH signal.

Thanks!


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top