[SE V16] Managed library 1

[Itsme117]

In our firm we regulary need to revise parts. In the Revision Manager we create a copy of an existing part. Then make the changes to this document. Back in the assembly environment we replace the revised parts by hand. In the help I read about the revision option. But in both the assembly environment as in the Revision Manager "Revisions..." or "Set action to revise" are hidden.

So I tought this has to deal with a missing managed library.

We have a server with Windows Server 2003. As far as I know, we don't have Sharepoint. Do we need Sharepoint to create a managed library. And do we need a managed library to make the revision commands show up?

 

[donyoung]

Hi,


Windows server 2003 is OK it comes with Sharepoint but the you have to
set up:
- a webserver (IIS 6)
- Windows SQL server using "Remote SQL"
- Insight

There should be a presentation available on any of the 2005 summit's
proceedings look for SharePoint2003Customization

dy

 

[donyoung]

Hi,

found it (not in 2005): it's accessible via the ugs ftp Server
and there in folder:

solid_edge/Summit/2004/SharePoint2003Customization.zip

dY

 

[donyoung]

Hi,

the above mentioned file is not very helpful without some
comments. To clearfy what is needed and has to be done

Installation sequence:

1. Windows 2003 Server
2. SQL Server Manager
3. SQL Server SP2 or higher
4. WSS (Windows SharePoint Services)
5. Insight Server

I have an install description but unfortunately in German

dy

 

[Itsme117]

Thanx for reply.

Maybe you can post this discripsion also. Ich spreche auch ein bischen Deutsch

 

[donyoung]

Hi,

it can be found here:

http://www.incobase.de/temp/SharePoint2_install_german.zip

dy

 

[Itsme117]

Vielen dank

 

[donyoung]

you're welcome