Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Screw Threads

  • Thread starter Thread starter dternst
  • Start date Start date
Status
Not open for further replies.
D

dternst

Guest
Is there anyone out there with the end-all, be-all way of developing screw threads?
 
If you are trying to generate realistic threads, it's a simple helical sweep cut with the thread profile as the cut section. Can significantly lengthen regen times. We've created sketches for the various thread forms so the user doesn't need to sketch anything but the trajectory.
 
Status
Not open for further replies.

Similar threads

P
Cosmetic threads with custom callouts and dimensions
Replies
1
Views
5K
canoemike
C
D
Cosmetic Threads.....
Replies
6
Views
4K
design-engine
D
T
Displaying cosmetic threads
Replies
8
Views
28K
steverh1958
S
S
generating taper threads
Replies
1
Views
4K
mekaneck
M
B
cosmetic threads in black and white
Replies
3
Views
4K
dr_gallup
D

Part and Inventory Search

Sponsor

Back
Top