Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Screw compressor seal clearance

Status
Not open for further replies.
Rizwan.O.

Rizwan.O.

Mechanical
Joined
Oct 3, 2022
Messages
8
Location
PK
Dear all

There is a ceased 'oil flooded' Screw compressor at our facility which has worn shaft and seal end. reference attached in the image. I would like to know that how much clearance (with compressor housing) is permissible at this end for proper sealing.

Kindly share any reference if possible. That will be much appreciated.

Compressor Specs:
Make: LiUTECH
Model: LU 132W
Flowrate: 24 m3/min
Power: 132kW

Thanks a lot
Regards
 
 https://files.engineering.com/getfile.aspx?folder=819ce231-4a12-433f-a3fe-10cdd1294c28&file=WhatsApp_Image_2022-11-28_at_10.49.31_AM.jpeg
Status
Not open for further replies.

Similar threads

A
  • Question Question
Compressor performance curve
Replies
0
Views
8K
AhmadAPC
A
S Jana
  • Locked
  • Question Question
Screw Compressor Vibration (BOG Compressor for LPG system )
Replies
4
Views
1K
georgeverghese
georgeverghese
J
  • Question Question
NATURAL GAS COMPRESSOR
Replies
10
Views
3K
georgeverghese
georgeverghese
S Jana
  • Locked
  • Question Question
high oil inlet temperature alarm for Propane Screw Compressor
Replies
5
Views
1K
S Jana
S Jana
A
  • Question Question
Parallel Compressor Setup With Uneven Capacities
Replies
2
Views
410
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top