Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations 3DDave on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Schedule Pipe uses

Status
Not open for further replies.

darkshadow2010

Mechanical
Jun 11, 2009
1
Hey Guys,

Just curious what the different recommended uses for the different schedules of pipe are. For example schedule 80 pipe used for high pressure apps and blah blah...but what about schedule 10 and 20...Is there a written standard that says schedule 10 used for this purpose and schedule 20 for these purposes and so on?
 
Replies continue below

Recommended for you

Yes, normally company's do have this, depending on what the media is and pressure and temperature.
 
I have used quite a bit of sch 10 pipe on low pressure special alloy such as Hastelloy(sp?) or super duplex.

Less material = Less Expensive (Most of the time)

Zuccus
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor