Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Scaning specified area for random curve and get coordinates

Status
Not open for further replies.
barkachary24

barkachary24

Mechanical
Oct 9, 2012
8
I want to scan the curve in matlab for a specified area suppose 0-10 in X axis and 50-150 in y-axis and get the co-ordinates of the points of the line.

getfile.aspx



I am very new in this. I am starting from scratch. so any help is appreciated.

regards Borad

 
Status
Not open for further replies.

Similar threads

chinsan
  • Locked
  • Question
Nodal coordinates and the strains at the nodes
Replies
5
Views
546
chinsan
chinsan
M
  • Locked
  • Question
How to get output in abaqus?
Replies
5
Views
4K
FEA way
FEA way
simulation_engineer_2022
  • Locked
  • Question
Get nodal deformed coordinates using Python
Replies
1
Views
371
FEA way
FEA way
Syed7777777
  • Locked
  • Question
Random Vibration Fatigue Analysis
Replies
1
Views
363
FEA way
FEA way
Zaurbek
  • Question
Different results for Static General, Dynamic Implicit and Dynami Explicit
Replies
6
Views
4K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom