I am trying to find a way to scale down sheet metal parts and still have the ability to unfold / flatten the part for manufacturing purposes. I can successfully scale down the model when I do an insert part copy, but unfolding the part copy is not possible 75% of the time. Is there a step that I am missing to do this properly? I have an entire assembly that I need to scale to .333 normal size, it would be nice to be able to scale the entire sheet metal assembly. Has anyone else ever run into this issue? Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Scaling Sheet Metal
- Thread starter MotoMfg
- Start date
JohnSlipec
Mechanical
You may want to try going into tools --> options --> part properties and change some of the numbers there such as bend radius, bend relief etc..
John Slipec, B.Sc.ME
CAD Administrator
EH Price Limited, Winnipeg MB
John Slipec, B.Sc.ME
CAD Administrator
EH Price Limited, Winnipeg MB
- Status
Similar threads
- Locked
- Question
- Locked
- Question