Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
scaling help
- Thread starter gmlrs
- Start date
You can scale models (parts) not full assemblies, but to do a model it to specific factor.
1) RMB in the toolbar area and click customize.
2) Go to Commands\Catagories\Features
3) There is an Icon, first row last one on the right. This is the one for scaling.
4) Drag and drop the icon on a toolbar of your choosing.
5) Open a part and click the Icon..I'm sure the rest of it is as plain as day for you.
You may already have the icon on your desktop. I do not so that is why I have gone through this setup.
Hope that helps, Scott Baugh, CSWP
George Koch Sons,LLC
Evansville, IN 47714
sjb@kochllc.com
1) RMB in the toolbar area and click customize.
2) Go to Commands\Catagories\Features
3) There is an Icon, first row last one on the right. This is the one for scaling.
4) Drag and drop the icon on a toolbar of your choosing.
5) Open a part and click the Icon..I'm sure the rest of it is as plain as day for you.
You may already have the icon on your desktop. I do not so that is why I have gone through this setup.
Hope that helps, Scott Baugh, CSWP
George Koch Sons,LLC
Evansville, IN 47714
sjb@kochllc.com
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question