Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Saving Settings

Status
Not open for further replies.

Stefan64

Mechanical
Joined
Apr 22, 2005
Messages
6
Location
US
It's been a long time since I've had to do this. How do you save your settings so that when you have to reinstall Windows/AutoCAD (or the whole drive, like me) you don't have to try and remember them all?

Steve
 
I copied any".mn" files but there are no ."arg." I falled to mention this is LT, if that makes a difference.
Steve
 
Yeah, I get that a lot. Thanks for the help,
Steve
 
Menu files (aclt.mnu, aclt.mnc, aclt.mns, and aclt.mnr)
You might search on these separately to see where they
are loaded. Have you used the help function within
acadlt to help with your question?
 
Thanks Guys. The Help function needs help, and I've got all the ".mn_"'s copied over. It's not a huge problem as I don't plan on blowing up my drive again in the near future (who does?); it's just a pain trying to remember all the little convenient things that get developed over the years.

I'll try the extender and see what happens.

Steve
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top