saving as autocad 14 format in 2004 1

[nuclearbluezx3]

how do i save down to autocad 14 from 2004?

 

[PLB]

I believe that you only need to use "SAVEAS". Autocad will give you a dialog box that you can use to navigate to the appropriate directory. At the bottom of this dialog box is a flyout bar that will give you a few options on the type of file to save it as.

Hope this helps,
Paul

 

[nuclearbluezx3]

the saveas flyout doesn't offer an autocad 14 file format....

 

[JPARKER70]

I DON'T THINK AUTOCAD 2004 WILL SAVE AS 14. I COULD BE WRONG. YOU CAN ALSO SET THIS UNDER TOOLS THEN OPTIONS THEN THE OPEN AND SAVE TAB.

 

[IFRs]

R2004 will not save as R14.
You need an earlier version of AutoCAD for that.

 

[TerryScan]

Autocad 2004 does not natively save back to R14. There is a converter available for free though:

http://usa.autodesk.com/adsk/servlet/ps/item?siteID=123112&id=3537266&linkID=2475323

 

[Exxit]

Hi,

more Informations:
"Removed and no hope to get back.
...
Save as R14 is removed. You have to save to R12 DXF instead.
...

http://www.jtbworld.com/?/autocad2004.htm

Lothar

 

[Hawkeye2]

Save to AutoCAD 2000i and get someone who has 2000i to save it to R14.

 

[Hawkeye2]

Also check CADdepot.com.