Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Save Failed (NX8/Teamcenter 9.3)

Status
Not open for further replies.

PeteSp

Mechanical
Joined
Oct 24, 2012
Messages
11
Location
US
Does anyone know the cause or solution to this failure? The odd thing is that I can't save it, but the guy right next to me can... After he saves it, I can save it again!
 
This is probably a GTAC case.
I believe that your Teamcenter setup needs a little help.

Regards,
Tomas
 
Plz try to Run the part clean-up from utilities / check the connectivity between NX and TC / try to login the other m/c using ur ID and try there you able to save or not. ensure both(you & ur neighbor) are same group in TC or there is any different. or you might have the reviewer access? without the NX part file we can't find the exact reason.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top