Save failed- file in use by another process

[scope63]

occasionally i get this message while in native. there are no other users or sessions open. what is the cause ? is there a setting? i am using NX 7.5.3.3

only thing i can do is save as.

i have seen this on both a stand-alone system or even networked with teamcenter.

Scott Copeland
Design Engineer
Persego Int'l

http://www.persego.com

 

[Arkance/PhoeNX]

There was an issue to do with facet loading that was fixed in NX7.5.4 and above. I would recommend updating to that MR or NX7.5.5 first.

Anthony Galante
Technical Resource Coordinator

NX4.0.4MP10, NX5.0.6, NX6.0.5, NX7.0.1, NX7.5.0-> NX7.5.5 & NX8.0.0 -> NX8.0.1

 

[scope63]

ok thanks
i don't see us moving up to that level- corporate decision, so i guess we just have to live with it for now.
thanks for your respondse.

Scott Copeland
Design Engineer
Persego Int'l

http://www.persego.com

 

[uwam2ie]

I had the same issue,
there is a customer default setting for assembly has infuence on the problem, uncheck the seeting for display warning on write protected parts
reagards

 

[scope63]

ok i'll check out the settings and see

Scott Copeland
Design Engineer
Persego Int'l

http://www.persego.com