SuzukiPhil
Aerospace
- Aug 11, 2004
- 6
Anybody have a manual or know how to set the resolution on a Sargon Gold Tracer Lather DRO, model 722? Sargon is out of business and I can't find the manuals.
Thanks,
SP
Thanks,
SP
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sargon DRO Info 1
- Thread starter SuzukiPhil
- Start date
- Status
-
1
- #2
ROBERT1951
Industrial
POWERUP, WHEN 8.8.8.8.8 ARE FLASHING , PRESS AND HOLD THE A/I BUTTON TO ENTER SETUP MODE. IN SET UP MODE THERE ARE 3 SCREENS THAT ENABLE YOU TO SELECT
; 1 SCALE RESOLUTIONS , 2. SCALE DIRECTIONS, 3. DIAMETER /RADIUS SELECTIONS.SCALE RESOLUTIONS. WHILE IN SETUP MODE, PRESS rad/dia UNTILL the dro displays the following (res .ooo5 x axis). Press the reset button of the desired axis to toggle through available scale resolutins. When the appropriate scale resolution are displayed, press a/i or any button other than resets, inch/mm, or RAD/DIA to exit to normal mode or press RAD/DIA to advance to the next setup screen. The last dispayed value and setting will be saved automatically.
; 1 SCALE RESOLUTIONS , 2. SCALE DIRECTIONS, 3. DIAMETER /RADIUS SELECTIONS.SCALE RESOLUTIONS. WHILE IN SETUP MODE, PRESS rad/dia UNTILL the dro displays the following (res .ooo5 x axis). Press the reset button of the desired axis to toggle through available scale resolutins. When the appropriate scale resolution are displayed, press a/i or any button other than resets, inch/mm, or RAD/DIA to exit to normal mode or press RAD/DIA to advance to the next setup screen. The last dispayed value and setting will be saved automatically.
- Status
Similar threads
- Locked
- Question