Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SAP2000 Section designer Issue 1

Status
Not open for further replies.
RK Sriwastav

RK Sriwastav

Civil/Environmental
Joined
Oct 17, 2017
Messages
56
Location
IN
Dear All,

I have modelled an 'I' shaped shear wall in the building using section designer. After running the analysis(static) and while checking the design, the 'I' shaped section is automatically getting converted to rectangular member of different c/s and reinforcement. Can anyone know about this fallacy of the section designer ?
Please tell me the way to get rid of it.

Please note the all the member are kept in 'Reinforcement to be checked' mode rather than 'Reinforcement to be designed' mode.

Thanks in Advance.


Ravi K
 
Status
Not open for further replies.

Similar threads

StathPol12
  • Question Question
SAP2000 measurements
Replies
2
Views
6K
Luceid
Luceid
GJoeRMK
  • Question Question
A Sap2000 API question, SapObject.SapModel.SolidObj.AddByCoord()
Replies
2
Views
2K
GJoeRMK
GJoeRMK
Brad805
  • Locked
  • Question Question
SAP2000 Quick Plots
Replies
7
Views
2K
Brad805
Brad805
Luceid
  • Locked
  • Question Question
SAP2000 Interactive Database Bug
Replies
0
Views
1K
Luceid
Luceid
MrMaritime
  • Locked
  • Question Question
SAP2000 Non Linear Time History (FNA or Direct Integration)
Replies
1
Views
2K
JoshPlumSE
JoshPlumSE

Part and Inventory Search

Sponsor

Back
Top