Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sandbag as Permanent Pipe Support 2

Status
Not open for further replies.

McDermott1711

Mechanical
Joined
Nov 17, 2010
Messages
319
Location
SG
A 42" line-break valve has a 2" sensing line which shall be branched min. 5D downstream in an underground gas pipeline. 2" branch shall be done at 12 o'clock. Is it acceptable (from engineering point of view)to use sandbags under 2" pipe (as it is shown in the below picture) permanently and backfill the line?

Sandbags_wc2fyx.png



Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has. Rene Descartes
 
Thanks Littleinch for your explanation!

Nothing is more fairly distributed than common sense: no one thinks he needs more of it than he already has. Rene Descartes
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top