Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sampling for mechanical testing of flanges size 32"

Status
Not open for further replies.
federella

federella

Mechanical
Joined
May 19, 2005
Messages
12
Location
IT
Thank you MarlaMike.
But the doubt is if the 32" size Blind Flange and 32" Welding Neck flange 300lb have the same hot working and reduction as to consent to take sampling for mech. test. from unique test blank.
 
Sort by date Sort by votes
Thank you MarlaMike.
But the doubt is if the 32" size Blind Flange and 32" Welding Neck flange 300lb have the same hot working and reduction as to consent to take sampling for mech. test. from unique test blank.

VFD
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

AgsMyDude
  • Question Question
Practical Implications of Impact Testing
Replies
16
Views
6K
GD2
GD2
Shahpar
  • Question Question
Ring Joint Flanges for 38 inch and larger size as per ASME B16.47 Series A
Replies
1
Views
3K
GD2
GD2
Prometheus21
  • Question Question
Size andtemperature of compressed gas slug.
Replies
13
Views
12K
LittleInch
LittleInch
T
  • Question Question
Hole size for PVC fire gear dryer
Replies
5
Views
11K
LittleInch
LittleInch
Martin Jones
  • Question Question
B31.3 (2024) fig. 323.2.2-1 note 1 min temp of blinds/blanks w/o impact testing
Replies
2
Views
9K
GD2
GD2

Part and Inventory Search

Sponsor

Back
Top