Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Safety factor for slope 2

Status
Not open for further replies.
L0k

L0k

Geotechnical
Joined
Dec 11, 2014
Messages
96
Location
NZ
Guys, what kind standard to be used for the reliable safety factor on slope stability under static and earthquake loading? thanks
 
Sort by date Sort by votes
How's this for a straight up answer..

1.0 seismic
1.5 static
 
Upvote 0 Downvote
i agree to publish this in the Standards i.e. ASTM, JIS, NZS etc
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
Need assistance with a RS2 Slope design - Blasted Pyroxenite being dumped down a slope
Replies
0
Views
873
Shawn van Wyk
S
Mdntramble17
  • Locked
  • Question Question
Reinforced slope erosion
Replies
4
Views
1K
Mdntramble17
Mdntramble17
JahmaiS_
  • Locked
  • Question Question
Slope Stability
Replies
5
Views
1K
GeoEnvGuy
GeoEnvGuy
geotechguy1
  • Locked
  • Question Question
Back analysis of stable un-failed slope
Replies
2
Views
1K
geotechguy1
geotechguy1
Geotech_Pavement
  • Locked
  • Question Question
Landfill Liner Slope Stability (Static & Seismic)
Replies
2
Views
994
GeoEnvGuy
GeoEnvGuy

Part and Inventory Search

Sponsor

Back
Top