Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
SAFE Single layer of rebar
- Thread starter TB545
- Start date
You can use the finite element method to achieve rebar area per length and manually calculate required rebars.
if it is not convenient, you can define a rebar with 1e-6 ( approximately zero ) diameter and then assign it to top or bottom rebars. then you can reach to required reinforcement in other layer. notice that you should reform the cover of reinforcement accordance with the place of single layer that you want to be.
if it is not convenient, you can define a rebar with 1e-6 ( approximately zero ) diameter and then assign it to top or bottom rebars. then you can reach to required reinforcement in other layer. notice that you should reform the cover of reinforcement accordance with the place of single layer that you want to be.
- Status
