Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SAE SPLINES ON PUMPS

Status
Not open for further replies.
Barnsey

Barnsey

Mechanical
Joined
Feb 22, 2005
Messages
3
Location
GB
Does anyone know where I can buy spline gauge pins within the UK? I need to measure the wear on an SAE spline 8/16 13 tooth 43.7mm OD.
 
Status
Not open for further replies.

Similar threads

Kristoffswe
  • Locked
  • Helpful tip Helpful tip
Need Advice on Replacing NBR 70 Seals in Classic Transmission
Replies
2
Views
1K
Kristoffswe
Kristoffswe
St0RM33
  • Locked
  • Question Question
Is there is a proper standard for designing choosing and straight coupling splines?
Replies
14
Views
1K
mfgenggear
mfgenggear
shitalyog
  • Locked
  • Question Question
Can we use front drive line with rotating 180 degree at Rear side? What will be impact on mounts?
Replies
7
Views
1K
CWB1
CWB1
bcavender
  • Locked
  • Question Question
SAE5 Bell Housing Speed Increaser
Replies
15
Views
947
TugboatEng
TugboatEng
KiwiME
  • Locked
  • Question Question
EV gear reducer has black oil, ref my post on over-constrained couplings.
Replies
18
Views
1K
KiwiME
KiwiME

Part and Inventory Search

Sponsor

Back
Top