Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

S number...? 1

Status
Not open for further replies.
emrekop

emrekop

Industrial
Joined
Dec 10, 2006
Messages
11
Location
TR
Hii everyone...my question is related with S numbers...
is there any difference between S number and P number...?can we use WPS with a PQR supporting P1 to P1 to weld S1 base materials...? Thanks
 
Sort by date Sort by votes
Per ASME IX, qualification on P1 to P1 qualifies P1 to S1 and S1 to S1. Qualification on S1 to S1 does not qualify P1 to P1 or P1 to S1.

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

metboss
  • Locked
  • Question Question
Welded v/s Single body Tubular Mandrels
Replies
2
Views
350
metboss
metboss
DRJStruct
  • Locked
  • Question Question
Face Plate Welded to S-Beam
Replies
5
Views
495
dik
dik
metboss
  • Locked
  • Question Question
Base metal compatibility V/s WPS
Replies
2
Views
458
metboss
metboss
Nashanas
  • Locked
  • Question Question
PWHT and Ferrite number
Replies
7
Views
744
EdStainless
EdStainless
W
  • Question Question
Splice Theory Question
Replies
3
Views
6K
SWComposites
SWComposites

Part and Inventory Search

Sponsor

Back
Top